FREQUENCY CONVERTER

FCM-Series 50/60 Hz Frequency Converter for Data Centres and Factories, 200–600 kVA

Converts between 50 and 60 Hz, 200 to 600 kVA · FCM-200 (VS) for equipment testing, five output voltages including 480 V

Power
200–600 kVA
Output Frequency
50 / 60 Hz ±0.1%
Efficiency
> 96.5%
Modules
50 kW, hot-swap
Output Voltage (VS)
357.2–508.8 V, incl. 480 V

Overview

The FCM-Series converts incoming mains to the frequency a machine actually needs. It accepts anything from 40 to 70 Hz with automatic 50/60 Hz sensing and delivers a selectable 50 or 60 Hz output held to ±0.1%. Five models run from FCM-200 to FCM-600, built from four to twelve 50 kW modules — add modules to raise capacity or to run N+X redundancy, and swap one out while the system stays live. Everything is serviced from the front, so the cabinet can sit against a wall with no rear clearance. The 200 kVA FCM-200 (VS) adds a VS-200 cabinet with a step-up/step-down transformer and a five-position voltage selector, so it can deliver 480 V at 60 Hz from a 380/400/415 V, 50 Hz supply. This model is used as a test supply for data-centre equipment: the 357.2 V position is 380 V minus 6% and 508.8 V is 480 V plus 6%, so equipment can be run at nominal voltage and at its low and high limits. The FCM-Series is a static frequency converter (SFC) that supplies equipment with a fixed frequency. It is not a variable frequency drive (VFD), which controls the speed of chiller, pump or fan motors.

Product photos

FCM-200 (left) with the VS-200 voltage selector cabinet (right)

FCM-200 (left) with the VS-200 voltage selector cabinet (right)

Key Features

  • ✓Five models — FCM-200, FCM-300, FCM-400, FCM-500 and FCM-600, built from four to twelve 50 kW modules
  • ✓Modules are hot-swappable under live load · add modules to raise capacity or run N+X redundancy
  • ✓Accepts 40–70 Hz input with automatic 50/60 Hz sensing · selectable 50 or 60 Hz output held to ±0.1%
  • ✓Three-phase five-wire (3P+N+PE) at 380/400/415 Vac · input range 304–478 Vac at full load
  • ✓Clean output — under 1% THDu on linear loads and under 5% on non-linear · unity power factor · phase accuracy 120° ±0.5°
  • ✓Overload 110–125% for 10 minutes and 125–150% for 1 minute · 3:1 crest factor
  • ✓Full protection — input and output voltage or frequency out of range, over-current, short circuit, over-temperature at module and cabinet, phase loss or imbalance, and fan failure
  • ✓LED with a 7 or 10 inch touchscreen · USB, RS-232, RS-485 and dry contact · optional SNMP/HTTP · IP20 cabinet serviced from the front
  • ✓FCM-200 (VS) offers five selectable output voltages, 357.2 / 380 / 400 / 480 / 508.8 V (L-L), at 50 or 60 Hz, set on the VS-200 front panel
  • ✓VS-200 cabinet with step-up/step-down transformer, digital voltmeter and output breaker · 241 A at 480 V · overall efficiency above 94%
  • ✓A test supply for data-centre equipment — 357.2 V is 380 V minus 6% and 508.8 V is 480 V plus 6%, for testing at nominal voltage and at the limits, at 50 or 60 Hz
  • ✓For data-centre equipment and machinery that needs 50 or 60 Hz different from the incoming supply

Certifications

IEC 62040-1 · IEC 60950-1 · IEC 62040-2 · IEC 61000-4-2/3/4/5

Available Models

FCM-200

Four 50 kW modules, direct 380/400/415 V output at 50 or 60 Hz. Cabinet 60 × 160 × 75 cm, about 270 kg.

Type: Modular Static Frequency Converter

Power: 200 kVA / 200 kW

FCM-200 (VS)

For equipment testing. Selectable 357.2 / 380 / 400 / 480 / 508.8 V output at 50 or 60 Hz. With the VS-200 cabinet: 140 × 160 × 100 cm, about 1,070 kg.

Type: FCM-200 + VS-200 Voltage Selector

Power: 200 kVA / 200 kW

FCM-300 / 400 / 500 / 600

Six to twelve 50 kW modules, 380/400/415 V output at 50 or 60 Hz.

Type: Modular Static Frequency Converter

Power: 300–600 kVA

Projects using this

Who makes it, who sells and installs it

  • LEONICS — brand owner — Modular Frequency Converter is sold under the LEONICS brand of LEONICS Co., Ltd.
  • Sales, installation, commissioning and service in Thailand — Leo Power Supply Co., Ltd. (LPS), the appointed LEONICS group distributor — tel +66 2-746-9500 ext. 51 · mobile 081-930-2618 · LINE @lps.leonics · lpsups.com
  • Contact LEONICS — Tel +66 2-746-9500 · rne@leonics.com — for system design, quotations and customers outside Thailand

Interested in this product?

Get a free quote — LEONICS engineers help design and estimate your project.