Products

LEONICS Products — Power Systems & AI Management

From Utility-scale Modular PCS, GridMind AI Energy Management, MTP-620x Hybrid Inverter, Solar PV systems, Microgrid, Energy Storage to True Online UPS — designed and manufactured in Thailand.

Power Electronics (9 products)

LEONICS's core competency since 1991 — bidirectional inverters, solar charge controllers, and specialty power conversion equipment for residential, C&I, and utility-scale applications. 9 products organized into 5 technical sub-groups.

APOLLO Single Phase Battery Inverter (S-120A / S-210 Series)
BATTERY INVERTER

Single Phase Battery Inverter

Single-phase battery inverter, 150 VA to 10 kVA

The APOLLO single-phase inverter family runs from the 150 VA S-120A for very small systems up to the 5 to 10 kVA S-210, which parallels to 10 units and comes in a version with energy storage built in

Power
150 VA–10 kVA
🔋
Battery
12 / 48 Vdc
📈
Peak Efficiency
up to 96.5%
🔗
Parallel Units
Up to 10
View details →
APOLLO Three Phase Battery Inverter (MTP-410 / 610 / 620 Series)
BATTERY INVERTER

3 Phase Battery Inverter

Three-phase battery inverter for mini-grids, 6 to 550 kVA

The APOLLO three-phase bidirectional inverter family spans 10 kW to 550 kW across four series, covering stand-alone mini-grids, parallel systems and grid-interactive installations

Power
6–550 kVA
🔋
Battery
120/240/480 Vdc
📈
Peak Efficiency
up to 97%
🔗
Parallel Units
Up to 8
View details →
APOLLO GTP-4000TL Series Three Phase Grid-Connected Inverter
PV INVERTER

3 Phase PV Inverter

Three-phase grid-connected solar inverter, 10 to 80 kW

Transformerless three-phase grid-connected inverter in 10, 20, 50 and 80 kW ratings — up to 98.6% peak efficiency in an IP66 enclosure rated for outdoor and harsh environments, for factory and commercial rooftops

Power
10–80 kW
📈
Peak Efficiency
98.6%
🛡
Protection
IP66
MPPT
2 or 4
View details →
SOLARCON MPPT Solar Charger (SCO / SCM / SCB Series)
MPPT

MPPT Solar Charger

Charges the battery straight from PV — 48 to 720 Vdc

The SOLARCON MPPT charge controller family charges the battery straight from the PV array with no AC conversion stage — 48 to 720 Vdc battery banks, 35 to 400 A charging current, above 98% peak efficiency

Charging Current
35–400 A
🔋
Battery
48–720 Vdc
📈
Peak Efficiency
> 98%
PV Input
3.3–180 kWp
View details →
SOLARCON SET-Series PWM Solar Charger with DC Load Timer
DC SOLAR

PWM Solar Charger with DC Load Timer

PWM battery charging with a built-in DC load timer

A charge controller for stand-alone DC systems — charges 12, 24 or 48 Vdc batteries and switches a 10 A DC load through a seven-mode timer, built for street, garden and gate lighting

Charging Current
20–30 A
🔋
Battery
12/24/48 Vdc
💡
DC Load Control
10 A
Timer Modes
7
View details →
APOLLO SPN Series Solar Pump Inverter
SOLAR PUMP

Solar Pump Inverter

Runs a 1 to 3 HP water pump on sunlight — no battery, no fuel

The APOLLO SPN solar pump inverter drives a 1 to 3 HP pump straight from the PV array with no battery in between, in three series depending on whether the pump runs on sun alone, falls back to mains when the sun is weak, or draws on both at once

Pump Power
1–3 HP
PV Input
up to 3.6 kWp
📈
Peak Efficiency
97%
🛡
Protection
IP54
View details →

AI & Software (1 products)

Edge-native AI energy management (GridMind AI) — vendor-agnostic, with predictive dispatch, automatic tCO2e reporting on TGO and IEA emission factors, and Modbus, TCP/IP and CAN connectivity.

Systems (6 products)

Turnkey integrated solutions — design, install, and operate. NODEX decentralized microgrid platform, complete Solar PV systems (5 kWp – 5 MWp), PV-Diesel-Battery microgrids (part of 693+ reference sites in 18 countries), BESS (100+ MWh installed), and the on-site SCU and MBMS control units.

NEW
LEONICS C&I All-in-One Energy Storage System
ALL-IN-ONE ESS

C&I All-in-One ESS

Hybrid inverter and battery in one cabinet — 20–125 kW / 220–520 kWh

A packaged storage system for commercial buildings and factories — hybrid inverter, battery, BMS, EMS and cooling arrive pre-integrated and factory-tested in one cabinet, so on site you only connect the AC and DC terminals

Inverter
20–125 kW
🔋
Battery
220–520 kWh
🔄
Backup Transfer
<10 ms
📦
Packages
8
View details →
NEW
LEONICS BESS 261 kWh Liquid-Cooled Outdoor Cabinet
LIQUID-COOLED BESS

BESS 261 kWh Liquid-Cooled

261 kWh liquid-cooled battery cabinet in a 1.35 m² footprint

A 261 kWh outdoor LFP battery cabinet with internal-cycle liquid cooling — 6,000 cycle cell life, parallel-scalable, in a 1.35 m² footprint

🔋
Energy
261 kWh
🔄
Cycle Life
6,000
💧
Cooling
Liquid
📐
Footprint
1.35 m²
View details →
SCU System Control Unit and MBMS Master Battery Management System
MONITORING

System Control & Battery Monitoring

On-site controllers that log the plant and put it on a portal you can open from anywhere

Two on-site units — the SCU reads devices over RS-485 Modbus, TCP/IP or CAN bus, then logs and forwards the data to a server, while the MBMS monitors and balances up to 39 lithium battery modules

🔌
Modbus Ports
4 × RS-485
🔗
Interfaces
Modbus / TCP-IP / CAN
🔋
Battery Modules
Up to 39 (MBMS)
🌐
Access
Web browser + OTA
View details →
NODEX — Network of Decentralized Energy
MICROGRID

NODEX

Decentralized microgrid for remote villages — built from three kinds of node

A decentralized microgrid platform with an energy trading layer — assembled from Power Nodes, Energy Nodes and Storage Nodes, so the network grows one node at a time as subscribers are added, without replacing what is already installed

🔗
Node Types
3
System Size
5–60 kVA
🔄
Power Nodes
Up to 10 in parallel
🌏
Built For
Rural electrification
View details →
PV-Diesel Hybrid + Centralized/Decentralized Microgrid
MICROGRID

Microgrid Systems

Microgrid Systems — PV-Diesel Hybrid + Off-Grid

Complete Microgrid systems — PV-Diesel Hybrid, Centralized, Decentralized — for remote communities, islands, and factories

🌐
Topology
Centralized / Decentralized
Diesel Saving
60-80%
📊
Track Record
693+ deployed
🌍
Countries
18 in 5 continents
View details →
Solar PV Systems — Complete Rooftop & Solar Farm
SOLAR

Solar PV Systems

Complete Solar PV Systems — Home, Rooftop, Solar Farm

Complete Solar PV systems — design, install, maintain — for homes, commercial buildings, factories and solar farms — one accountable party from design through O&M

Range
5 kWp – 5 MWp
🏗
Markets
Home / C&I / Utility
📈
Service
Full Turnkey
🔧
Includes
Design + Install + O&M
View details →

EV Charging (4 products)

Four EV charging products — the LEVA smart charger at 7.4 kW single-phase or 22 kW three-phase managed over OCPP, EV Back bidirectional charging that feeds up to 3 kW from the car battery back into the home during an outage, the EV2C dual-port charger serving two EVs from one unit, and the IC-CDP portable AC charger at 3.5 and 7 kW that travels with the car.

LEVA-series — 7.4 / 22 kW Wall-mounted Smart EV Charger
EV CHARGER

LEVA Smart EV Charger

Tethered Type 2 charging at 7.4 kW single-phase or 22 kW three-phase, managed over OCPP

A wall-mounted charger for buildings, condominiums, hotels and service stations — LEVA-07 at 7.4 kW single-phase and LEVA-22 at 22 kW three-phase, with a tethered Type 2 cable, app control and an OCPP link to a management system.

Charging power
7.4 / 22 kW
🔌
Connector
Type 2 tethered
📡
Protocol
OCPP
🛡
Protection
IP65 / IK10
View details →
EV Back — Bidirectional Charger that Backs Up the Home from the Car
V2H · BIDIRECTIONAL

EV Back

Charges the car at 7 kW and feeds up to 3 kW back from its battery when the grid fails

A bidirectional charger that turns the car's battery into the home's backup supply — it charges the vehicle at 7 kW, and when the grid fails it feeds up to 3 kW back to the essential household loads, with no separate home battery to buy.

Charging
7 kW
🔋
Backup to home
3 kW
Solar
3 kWp
📜
Thai patent
303002527
View details →
EV2C-series — Dual-port Charger for Two EVs from One Point
DUAL-PORT

EV2C Dual-port Charger

Two 7 kW Type 2 cables that switch between cars on their own, on the existing meter

A dual-port charger for a home or workplace with two EVs — plug both in and let the unit manage the queue, on the existing meter and distribution board, with no new main cabling.

Charging power
7 kW
🚗
EVs per unit
2
Alternate
2 / 3 / 4 hr
🛡
Protection
IP65 / IK10
View details →
PORTABLE · MODE 2

IC-CDP Portable Charger

A mode-2 charger that lives in the car — plugs into an existing outlet, nothing to install

A 3.5 / 7 kW charger that travels with the car instead of bolting to a wall — plug into the outlet at your destination and charge, dialing the current from 6 to 32 A to suit the circuit, with the residual-current protection built into the unit rather than borrowed from the socket.

Charging
3.5 / 7 kW
🎚
Adjustable
6–32 A
🛡
Built-in RCD
Type A + DC 6 mA
🌦
Operates
−25 to 50°C · IP66
View details →

Critical Power (3 products)

Mission-critical backup power — True Online Double-Conversion UPS (500 VA – 800 kVA) for hospitals, data centers, and banking, Automatic Voltage Regulators (AVR) for sensitive industrial loads, and FCM modular static frequency converters for production machinery. Manufactured in Thailand since 1991.

True Online and Line Interactive UPS
UPS

UPS

Uninterruptible power supplies from 500 VA to 800 kVA — with a dedicated site of its own

LEONICS uninterruptible power supplies span four product lines, from a 500 VA line-interactive unit for an office PC up to an 800 kVA true-online system for CT and MRI suites and heavy industry — the full catalogue, service and rental details live on lpsups.com

Range
500 VA – 800 kVA
🔌
Topology
True Online + Line Interactive
🔄
Transfer
0 ms (True Online)
🌐
Dedicated Site
lpsups.com
View details →
NEW
FCM-Series Modular Static Frequency Converter
FREQUENCY CONVERTER

Modular Frequency Converter

Converts between 50 and 60 Hz, 200 to 600 kVA

A static frequency converter from 200 to 600 kVA, built from 50 kW modules that can be swapped while the unit stays live — it delivers a steady 50 or 60 Hz within ±0.1% for imported machinery that runs on a different mains frequency

Power
200–600 kVA
🔄
Output Frequency
50 / 60 Hz ±0.1%
📈
Efficiency
> 96.5%
🔧
Modules
50 kW, hot-swap
View details →
Wise11 / WiseMP11 and ECON Automatic Voltage Stabilizer
STABILIZER

Automatic Voltage Stabilizer

Holds mains at a steady 220 Vac — 2 to 50 kVA

Single-phase automatic voltage stabilisers from 2 to 50 kVA — they take fluctuating mains and hold the output at 220 Vac, shielding equipment from sags, surges and spikes

Range
2–50 kVA
🎯
Output Accuracy
±2.5% / ±5%
📈
Efficiency
> 97% (ECON)
🔌
Phase
Single phase
View details →

Need help choosing the right product?

Free consultation — LEONICS engineers help you select the right model with sizing, pricing, and payback estimates.